Measuring Instrument×ウィズソル - List of Manufacturers, Suppliers, Companies and Products

Measuring Instrument Product List

1～5 item / All 5 items

Displayed results
Pipe Continuous Thickness Measurement Device

Pipe Continuous Thickness Measurement Device

Three types in total, including the UDP large type, which has evolved in both digestion volume and accuracy with 48 probes!

The pipe thickness measurement device "UDP-48" is an ultrasonic continuous thickness measurement device that enables measurements of approximately 500mm in width in a single run. It excels at inspecting large pipes, tank side plates, and other objects with a wide measurement range, particularly for detecting corrosion on the backside. Additionally, we offer the palm-sized portable UDP type "UDP-8" and the "UDP-24," which allows for easy pipe inspections with automatic operation. 【Features of UDP-48】 ■ Can be applied to narrow areas with a scanning jig height of approximately 60mm ■ Adheres to the target object with a magnetic roller and moves in a straight line manually ■ Contact medium is applied using a spray or water pump ■ Efficiency in verification tasks through full waveform recording functionality ■ Visual judgment is possible through numerical display and color mapping *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manual Scanning Continuous Plate Thickness Measurement Device

Manual Scanning Continuous Plate Thickness Measurement Device

From "point" to "line," and then from "line" to "plane"! Quickly check the reduction status with straight-line driving.

The manual scanning continuous plate thickness measurement device 'UDP-M1' is designed to confirm thickness variations along the same line where material reduction is anticipated. It is effective for inspecting corrosion on the backside of piping (including elbows) and flat plates. Previously, thickness measurements were taken at points, but now linear measurements can be easily performed. Additionally, we also offer the 'UDP-M2', which allows for an understanding of material reduction over a surface and provides visual judgment through color mapping. 【Features of UDP-M1】 ■ The encoder allows for the identification of reduction locations. ■ Four magnetic wheels securely adhere to the inspection object, enabling manual scanning. ■ The contact medium can be automatically supplied with water by a pump, allowing for stable measurements. ■ The measurement pitch is as small as 1mm, improving the detection rate of reduced areas. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-speed water immersion ultrasonic thickness measurement device for heat exchange tubes.

High-speed water immersion ultrasonic thickness measurement device for heat exchange tubes.

High-speed diagnosis of the entire tube! Data storage for the entire length of the tube and output of wall thickness color mapping are also possible.

The high-speed immersion ultrasonic thickness measurement device for heat exchange tubes, 'UTIS', is a system that confirms the wall thinning of the inner and outer surfaces of heat exchange tubes at high speed. It allows for accurate understanding of wall thinning conditions through full circumference and full length measurements. Visual judgment is also possible through measurement results with color mapping. The encoder enables the identification of wall thinning locations, and the acceleration of mirror rotation significantly improves the extraction speed. Additionally, the inner and outer surface amplifier switching function allows measurements down to a remaining wall thickness of 0.6mm. 【Specifications (partial)】 ■ Applicable pipe inner diameter: Φ9.5 to Φ50mm ■ Measurable wall thickness: 0.6 to 10mm ■ Probe frequency: 7.5 to 15MHz ■ Repetition frequency: 10 to 20kHz *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat exchange tube immersion type ultrasonic thickness measurement device

Heat exchange tube immersion type ultrasonic thickness measurement device

Applicable pipe inner diameter Φ9.5 to Φ50mm, measurable wall thickness 0.5 to 10mm! Standard inspection for tubes.

The "IRIS" water immersion type ultrasonic wall thickness measurement device for heat exchange tubes accurately measures the remaining wall thickness from the inner surface of the tube using ultrasonic waves. Ultrasonic waves are transmitted and received to the pipe wall using a reflective mirror at the tip of the turbine. The turbine rotates at high speed due to water pressure, and the mirror also rotates simultaneously, allowing for data to be obtained around the entire circumference. 【Features】 ■ Real-time measurement while viewing cross-sectional images ■ Ability to distinguish between inner and outer surfaces of reduced thickness areas ■ Integrated structure for easy transportation to and from the site, excellent operability on site *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tank bottom plate continuous thickness measurement device

Tank bottom plate continuous thickness measurement device

Thickness measurement of tank bottom plates using a 48ch ultrasonic thickness gauge! High-density and high-speed measurement is possible.

The tank bottom plate continuous thickness measurement device "UDT-48" is an ultrasonic continuous thickness measurement device that has obtained performance evaluation certification from the Hazardous Materials Safety Technology Association. (January 16, 2012, Safety Evaluation No. 0063) It allows measurements from the coating surface and can measure a width range of approximately 360mm in a single run. It is the successor to "UDT-24," featuring advanced hardware and software technology. 【Features】 - Accurate understanding of thinning conditions through full surface measurement - Visual judgment possible through color mapping - Applicable for safety inspections - Improved detection accuracy of natural corrosion (back side) due to enhanced probe design - Increased efficiency of verification work through full waveform capture functionality - Improved operability and reduced areas where measurement is not possible due to miniaturization and lightweight design of the device *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Measuring Instrument

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.